Volume 11 - Volume 11
Design, Fabrication and CFD Analysis of Jet Impingement Solar Dryer for Copra
Abstract
This Paper attempts to study the variation of simulation and fabricated jet impingement dryer to
define how to increase efficiency, temperature and best quality of the dryer. The jet impingement is
helps to increase the overall temperature of the exhaust air. where increasing the temperature
slightly and velocity ranges of drying time as been reduced. The experimental process has been
carried in the copra.
From the CFD analysis end results establish the flow jet impingement processing on the absorber
where a strong function of heat transfer enhancement. The present process concludes that the mass
flow ranges of air as been influence the heat transfer rates. At solar radiation 500-1000 (W/M
), 348K ambient temperature and 0.048(Kg/S) mass flow ranges has been get at the end analysis.
Now a day the new model innovations are needed in solar dryer to fulfil the requirements of drying
industrial and agricultural products. The new design process analysis and assumptions are very
necessary to design any system. By comparison solar drying fulfil the requirements than sun drying
processing. Under the such process and conditions Effect of mass flow ranges of air, solar radiation
on exit air temperature, and efficiency has been analyzed.
Paper Details
PaperID: 2092
Author's Name: M. Kannan, P.M. Venkatesh, A.R. Vijay Babu and Vibha Parmar
Volume: Volume 11
Issues: Volume 11
Keywords: Collector, Dryer Temperature, Absorber Plate, CFD Analyszing, Etc.
Year: 2021
Month: May
Pages: 22-36