Submissions

Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • Check Author Guidelines

Author Guidelines

  • The  GEINTEC Magazine will submit all manuscripts received to the analysis of ad hoc consultants, whose names will remain confidential and who will issue opinions to decide on the relevance of their acceptance, and may even re-present them to the author (s) with suggestions for necessary changes are made and / or so that they are in line with the journal's editorial standards. The evaluation process is "Double Blind Peer Review" and each article will be submitted to at least two reviewers, if there is a divergence in the analysis, the article will go on to another reviewer. The evaluation is in  anonymity valid for both sides (reviewer and reviewed).
  • The Journal GEINTEC is not responsible for concepts and opinions issued by autores.O spontaneous sending any submission automatically implies full assignment of copyright to the Journal GEINTEC . The contribution is original and unpublished, and is not being evaluated for publication by another journal. The GEINTEC Magazine receives original scientific articles for publication, which have not been published in any other form of publication. The content of the works is the sole responsibility of the author (s), and does not reflect the opinion of the Editor, Section Editors or Members of the Editorial Board .

  • The submission file is in Microsoft Word, OpenOffice or RTF format and I am aware that writing sent in other formats (including PDF) will not be accepted.
  • URLs for referrals were provided when possible.

    EXAMPLE OF HOW TO REFERENCE

    Book with 1 author:
    Model: SURNAME1, N1; Title. Edition. Place: Publisher, date. Volume or total pages. (Series or Collection). Obs .: Documents with up to 3 authors, indicate the three separated by “;” (semicolon). Never use "e", "and" or "&"; N = acronym of the name


    Book with +3 authors:
    When a book has more than 3 authors, quote the first, accompanied by the expression et al.
    Model: SURNAME1, N1 et al; Title. Edition. Place: Publisher, date. Volume or total pages. (Series or Collection).

    Book chapter
    Model: SURNAME, N. Chapter title: subtitle. In: SURNAME, Name. Title of the book. Place: Publisher, date. Initial-final pages of the chapter.


    Dissertations and Theses
    Model: SURNAME, N. Title of the thesis or dissertation: subtitle. Defense date. Total pages or sheets. Dissertation or Thesis (Master or Doctorate in concentration area) -Department or Center, Institution, Place, date of publication.


    Work presented at congresses, symposia and similars
    Model: SURNAME, N .; SURNAME, N. Title of the work. In: EVENT TITLE, no., Date, Place of the event. Proceedings ... or Abstracts ... or Proceedings ... Place of publication: Publisher, date. initial-final pages of the work.


    Academic works and handouts
    Model: SURNAME, N.Title: subtitle. Place: Department, date. Number of pages. Course Completion Work or Graduation Work or Internship Report or Handout.


    Periodical publications (scientific journals in general, newspapers)
    Model: SURNAME, N. Title of the article. Journal title, Place, volume, number, initial-final pages of the article, date.
    Internet Sites
    Model: SURNAME, N.or INSTITUTIONAL AUTHORITY or entry by TITLE (if there is no authorship). Title. Available at: <electronic address>. Accessed on: date.

  • The text follows the style standards and bibliographic requirements contained in the  MODEL which is available for download in the Guideline for Authors section.
  • Ethics Committee: The ethical criteria of the research must be respected within the terms of Resolutions 196/96 and 251/97 of the National Health Council. When involving experiments with human beings, the authors should send the opinion of the Research Committee as a "supplementary document". Recognized ethics or statement that the procedures used in the research are in accordance with the ethical principles that guide the resolutions.
  • Conflict of interests: the authors' responsibility for the preparation of the manuscript is declared, as well as the existence or not of any conflicts of professional, financial interest or direct or indirect benefits that may influence the results of the research. Authors must report any potential conflict of interest, including political and / or financial interests associated with patents or property, provision of materials and / or inputs and equipment used in the study by the manufacturers.

    If there are conflicts of interest in the research, make it explicit in the submission in comments to the editor.

  • Disclaimer: The procedures adopted by the GEINTEC Magazine  for the registration and publication of errata, retractions and expressions of concern are based on standards presented by the indexer and publisher SciELO, which follow the guidelines of the main ethics, indexing and scientific publication committees. The main source in the area of ​​the journal is the  COPE Retraction Rules.
  • Plagiarism: The Journal GEINTEC conta with the collaboration of reviewers , who at the time of the evaluation double blind, notify the editorial team any substantial similarity between the manuscript in question and articles already published or simultaneously submitted to other journals and other information considered pertinent.
  • Funding sources: Authors must declare, when applicable, all sources of funding or support, institutional or private, for the study.
  • Dictamen process

    The opinion process takes into account the following steps:

    (1) Once the work has been received (through the OJS platform) a plagiarism review is performed using CopySpider or similar software. If plagiarism or any situation that violates the ethical standards of scientific publications and COPE (Publications Ethics Committee http://publicationethics.org/) is detected, it will proceed: (a) reject the article, (b) communicate the plagiarism / self-plagiarism / anomalous situation and, finally, (c) communicate to the author's institution.

    When the existing problem is related to the originality of the document and even the transfer of property rights by the author has been signed, proceed to: (a) reject the article, (b) notify the anomalous situation of the author, (c) communicate to the institution of the author and, finally, (d) inform the initial source of the publication (journal, editorial or institution) that the article was postulated in our journal.

    (2) If you do not find any indication of the situations described above, the text reviewed by the editorial staff of the magazine is made, so that it meets the requirements established in the section of the guidelines for authors: http://www.revistageintec.net/ index.php / magazine / about / submissions # authorGuidelines

    (3) Subsequently, there is the blind peer review process, which reviews the scientific and academic parameters of each of the works, in the double-blind modality.

    (4) Once the previous process ends, the author (s) is informed of the final result of the process through the platform of the Magazine. The article can be accepted, accepted with modifications, rejected or resubmitted (where the author's comments are sent to the author, so that he can redo the writing and restart the entire editorial process).

    (5) Once the work complies with all requirements for publication, the author (s) are informed that they must sign the rights allocation form.

    (6) If there is any dispute with any of the works published in these cases, an Intellectual Property Commission is composed of representatives from the different legal, research and editorial bodies of the API. They are the ones that indicate the path that must be followed before any process, because the API is the assignee of the rights to work.

Author Guidelines Edit Author Guidelines

Dear author, please download the MODEL with the rules for publication. Only works submitted in this model will be accepted. Written in PDF format will not be accepted. Click HERE to download.

Engineering and Technology

Intellectual Property and Technology Transfer (Patent, Trademark, Industrial Design, Geographical Indication, Computer Program, Copyright)

Make a new submission to the Engineering and Technology section.

Management and Social Science

Technological Prospecting

Make a new submission to the Management and Social Science section.

Innovative science and technology

Innovative Management and Entrepreneurship

Make a new submission to the Innovative science and technology section.

Articles (Active from 2011 to 2014)

This section was DISABLED in December 2014.

Make a new submission to the Articles (Active from 2011 to 2014) section.

Privacy Statement  Edit Privacy Statement

 

The names and addresses informed in this magazine will be used exclusively for the services provided by this publication, and will not be made available for other purposes or to third parties.

 

Engineering and Technology

Propriedade Intelectual e Transferência de Tecnologia (Patente, Marca, Desenho Industrial, Indicação Geográfica, Programa de Computadores, Direito do Autor)

Management and Social Science

Prospecção Tecnológica

Innovative science and technology

Gestão e Empreendedorismo Inovador

Privacy Statement

Introduction

Your privacy is important to CIIR.  This privacy statement provides information about the personal information that CIIR collects, and the ways in which ACADEMIC JOURNALS uses that personal information.
 
Personal information collection
CIIR  may collect and use personal information that is necessary for the processing and publication of manuscripts submitted to us. This information may include names, affiliation and contact details; including postal address, emails, phone numbers and fax numbers.
 
Using personal information
Any personal information received by CIIR will only be used to: process and publish your manuscript. 
 
  • administer this website;
  • personalize the website for you;
  • enable your access to and use of the website services;
  • process your manuscript;
  • publish your manuscript;
  • send to you communication about your manuscript
  • send to you statements and invoices;
  • collect payments from you; and
  • send you marketing communications.
 
Where CIIR discloses your personal information to its agents or sub-contractors for these purposes, the agent or sub-contractor in question will be obligated to use that personal information in accordance with the terms of this privacy statement. 
 
In addition to the disclosures reasonably necessary for the purposes identified elsewhere above, CIIR may disclose your personal information to the extent that it is required to do so by law, in connection with any legal proceedings or prospective legal proceedings, and in order to establish, exercise or defend its legal rights.
 
Securing your data
CIIR will take reasonable technical and organisational precautions to prevent the loss, misuse or alteration of your personal information. 
 
Cross-border data transfers
Information that CIIR collects may be stored and processed in and transferred between any of the countries in which CIIR operates to enable the use of the information in accordance with this privacy policy.
 
In addition, personal information that you submit for publication on the website will be published on the internet and may be available around the world.
 
You agree to such cross-border transfers of personal information.
 
Updating this statement
CIIR may update this privacy policy by posting a new version on this website.  
 
You should check this page occasionally to ensure you are familiar with any changes.  
 
Other websites
This website contains links to other websites.  
 
A CIIR is not responsible for the privacy policies or practices of any third party.
 
Contact  CIIR
If you have any questions about this privacy policy or CIIR' treatment of your personal information, please send an email us